MCH-3002
$179.99
Now: $99.99
|
| Frequency range |
0.1 Hz~2MHz |
| Output waveforms |
sine, Triangle, square, ±Ramp, ±Pulse |
| Output impedance |
50Ω ±10% |
| Output Amplitude |
Not less than 20Vp-p(open circuit) |
| DC Voltage |
0~±10V continuously adjustable |
| Symmetry range |
90:10-10:90 |
| Rising edge of square |
Less than 100ns |
| Sine characteristic |
| Distortion |
Less than 1% at 10Hz-100KHz |
| Frequency response |
0.1Hz~100KHz less than ±0.5ns
100KHz~2MHz less than ±1dB |
| TTL / CMOS output |
| Level |
TTL low level less than 0.4V in pulse wave, high level less than 3.5V
CMOS low less than 0.5V in pulse wave, high level 5V~14V continuously variable
|
| Rising time |
| VCF input |
Less than 100ns |
| Input voltage |
-5V~0V±10% |
| Max. volt-controlled |
1000:1 |
| Input signal |
DC-1KHz |
| Frequency counter |
| Measuring range |
1Hz~30MHz |
| Input impedance |
Not less than 1MΩ/20pF |
| Sensitivity |
100mVrms |
| Max. input |
150V(AC+DC) |
| Input attenuation |
20Db |
| Accuracy |
Less than 0.003%±1digit |
| Dimension |
310(W) ×100(H) ×260(D)mm |
| Weight |
4Kg |
|
Arbitrary Waveform / Function Generator
SM-4040 $390.00 |
Features:
* High resolution, accuracy and stability
* VFD display and rubber keypad allow easy
operation
* Various Waveforms suitable for many
applications
* Wide range of Sweep freq, start and stop
freq. can be set independently
Specification:
Waveforms
|
| Main Waveforms |
Sine, Square (Only sine is available
above 40MHz) |
| Waveform Length |
8-16000 points |
| Amplitude
Resolution |
12bit |
| Sampling Rate |
200MSa/S(≤80MHz) |
| Built - in Arbitrary |
Triang,+Ramp.+Pulse, Rise/fall
exponential, Rise/fall logarthm,Gauss noise, Cardiac, SIN(X)/X, DC. |
| Waveform Length |
8-16000 points |
| Amplitude Resolution |
10 bits |
| Sampling Rate |
10MSa/S(≤80MHz)
20MSa/S(120MHz) |
Arbitrary Waveforms
|
| Waveform Length |
8-16000 points |
| Amplitude
Resolution |
10bit |
| Sampling Rate |
10MSa/S(≤80MHz)
20MSa/S(120MHz) |
| Memory |
6*4k |
|
